Inconel Flanges Manufacturer

ASTM B564 UNS n06625 Flanges suppliers in Mumbai, India

Cheap Inconel 625 Flanges, Inconel 625 UNS n06625 Flanges at Factory price in India

Kamlesh Metal (India) is one of the recommended Inconel Flanges Manufacturer In India. Our ASTM B564 Alloy Flanges is a family of austenitic nickel-chromium-based superalloys. Type Inconel Blind Flanges can also be roll-threaded after full aging by using induction heat to 1,300 °F (704 °C) without increasing the grain size. Inconel Plate Flanges is retains strength over a wide temperature range, attractive for high-temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel Slip On Flange (SORF) high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy. Inconel Flat Face Flange it is an important part of inconel flange family.

Get trusted & verified Inconel Flanges suppliers in Singapore, UAE, Dubai, UK, Malaysia, Philippines, Australia and South Africa.

Inconel 625 UNS n06625 Flanges at unbelievable price in India. Visit ASTM B564 UNS n06625 Flanges manufacturer's mill in India, ask for asme sb 564 n06625 free sample.

Inconel 625 Flange is forged at 1038 to 1233°C (1900 to 2250°F). Inconel Weld Neck Flange is annealed at 1149°C (2100°F).

Our Inconel Flange cooled at temperatures ranging from 538 to 760°C (1000 to 1400°F) in order to prevent thermal cracking. We believe in customers satisfaction with our product and quality of product which we gonna supply to our customers. The benefits of our Inconel Flanges include a long service life that will retain an attractive, clean finish with low maintenance cost, therefore contact us.

Inconel Flanges Price List India

Inconel Flanges	US $0.5-900 / Piece (FOB Price)
Inconel Pipe Flanges	US $300-400 / Ton (FOB Price)
Inconel Forged Flanges	US $1-800 / Piece (FOB Price)
Inconel Socket Weld Flanges	US $0.5-900 / Piece (FOB Price)
Inconel Blind Flanges	US $1-200 / Piece (FOB Price)

Please note this is an approx Cost of Inconel Flanges in India. For final ASTM B564 UNS n06625 Flanges price list please contact Kamlesh Metal (India)

Inconel Flanges manufacturers in India

Kamlesh Metal (India) is PED & Crisil rated manufacturer and exporter of Inconel Flanges, ASTM B564 UNS N06625 (dual marked and certified), ASME B16.5, raised face, annealed and fully machined, smooth finishas per MSS-SP6, Inconel Flange hardness as per NACE MR0175 and tested to ASTM A262 E and PMI.

Inconel Flanges Specification and Standards

Specifications	ASTM B564 / ASME SB564
ASME B16.5 Inconel Flanges size range	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Inconel Flanges Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
Inconel Flanges Standard ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Inconel Flanges Standard DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Inconel Flanges Standard JIS	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Inconel Flanges Standard UNI	6Bar 10Bar 16Bar 25Bar 40Bar
Inconel Flanges Standard EN	6Bar 10Bar 16Bar 25Bar 40Bar
Main Types	Forged / Threaded / Screwed / Plate
Flange supporting material	Gasket, Ring Joint, Flange Bolts
Inconel Pipe Flanges Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Most common types of Inconel 625 Flanges	Weld Neck Ring Flange (WNRF), Inconel 625 Slip-On Ring Flange (SORF), Inconel 625 Blind Ring Flange (BLRF), Inconel 625 Socket Weld Ring Flange (SWRF), Inconel 625 Threaded Ring Flange, Inconel 625 Lap Joint Ring Flange (LJRF), Inconel 625 Ring Type Joint Flange (RTJF), Inconel 625
Production technique	Forged, Heat treated and machined
Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations Inconel 625 Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange
Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Origin	Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of	Rtj Flange Pn16 Flange DIN 2566 pn16 DIN 2566 en 1092 1 DIN 2566 pn10 Inconel 625 Large Diameter Flange Inconel 625 Sorf Flange Inconel 625 Blind Flanges Inconel 625 Table Flanges Inconel 625 Weld Neck Flanges Inconel 625 Threaded Flanges Inconel 625 Slip-On Flanges Inconel 625 Socketweld Flanges Inconel 625 Plate Flanges Inconel 625 Lap Joint Flanges Inconel 625 Loose Flanges Inconel 625 Orifice Flanges Inconel 625 AS 4087 Water Flanges
Inconel Flanges Standard	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) Any other specilised flanges DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for Inconel Flanges	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Inconel Flanges Application	To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Inconel Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

ASME B1.20.1, Pipe Threads, General Purpose ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250 ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 ASME B16.11, Forged Fittings, Socket Welding and Threaded ASME B16.25, Buttwelding Ends ASME B16.36, Orifice Flanges ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60 ASME B31.1, Power Piping ASME B31.3, Process Piping ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

Prestige quality Inconel Flanges manufacturers in India offer these ASTM B564 UNS n06625 Flanges in DIN, ISO, JIS or ANSI standard.

Inconel Flanges Weight Chart

15mm (1/2") Inconel Flanges Weight Chart

Kamlesh Metal (India) is an ISO certified Inconel Flanges manufacturer & distributor in India

Kamlesh Metal (India) is a manufacturer and supplier of Inconel Flanges offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

Inconel UNS N06625 Pipe Flanges	Inconel 625 Raised Face Slip On Flanges
Inconel 625 Exhaust Flanges	Inconel 625 Slip On Plate Flanges
Inconel UNS N06625 Header Flanges	Inconel 625 Slip On Flanges
Inconel Alloy 625 Plate Flanges	Inconel UNS N06625 Pipe Flanges
Inconel 625 Backing Flanges	Inconel 625 Exhaust Flanges
Inconel UNS N06625 Tube Flanges	Inconel 625 Header Flanges
Inconel 625 Stub End Flanges	Inconel 2.4856 625 Raised Face Weld Neck Flanges
Inconel 625 Shower Rod Flanges	Inconel 625 Sae Flanges
Inconel UNS N06625 Slip On Flanges	Inconel 625 Weld Neck Flange
Inconel 625 Screwed Flanges	Inconel 625 Clad Flanges
Inconel 2.4856 625 Socket Weld Flanges	Inconel Alloy 625 WNRF Flange
Inconel UNS N06625 Sbc Header Flanges	Inconel 625 Raised Face Blind Flanges
Inconel 625 Split Flanges	Inconel 625 Blind Flanges
Inconel 625 Slip-On Pipe Flanges	Inconel 625 Blind Flange
Inconel 625 Square Flanges	Inconel 625 Ansi Flanges
Ansi 150 Inconel 625 Flanges	Inconel 625 BLRF Flanges
Inconel 625 Blank Flanges	Inconel 625 Orifice Flanges
Inconel UNS N06625 Bsp Flanges	Inconel 625 Orifice Flanges
Inconel 625 Companion Flanges	Inconel 625 Orifice Flanges
Inconel 2.4856 625 Class 150 Flanges	Inconel UNS N06625 Duct Flanges
Inconel 2.4856 625 Cover Flanges	Inconel B564 625 Orifice Flanges
Custom Inconel 625 Flanges	Inconel 625 Socket weld Flanges
Class 600 Inconel 625 Flanges	Inconel 625 Socket weld Flanges
Inconel Alloy 625 Din Flanges	Inconel 2.4856 625 Socket weld Flanges
Large Diameter Inconel 625 Flanges	Inconel 625 SWRF Flanges
Table E Inconel 625 Flanges	Inconel 625 Socket weld Flanges
Inconel UNS N06625 Floor Flanges	Inconel 2.4856 625 Threaded Flanges
Inconel 625 Forged Flanges	Inconel 625 Threaded Flanges
Gaskets For Inconel 625 Flanges	Inconel 2.4856 625 Threaded Flanges
Inconel 625 Handrail Flanges	Inconel 625 Manifold Flanges
Inconel 625 Flanges	Inconel Alloy 625 Threaded Flanges
Inconel 625 Lap Joint Flanges	Inconel UNS N06625 Threaded Flanges
Inconel Alloy 625 Long Weld Neck Flanges	Inconel 2.4856 625 Long weld Neck Flanges
Inconel 625 Metric Flanges	Inconel 625 Long weld Neck Flanges
Inconel 2.4856 625 Muffler Flanges	Inconel Long weld Neck Flanges
Inconel 625 Pump Flanges	Inconel 625 Orifice Flanges
Inconel Alloy 625 Pressed Flanges	Inconel Ring Type Joint Flanges
Inconel Alloy 625 Puddle Flanges	Inconel 625 Ring Type Joint Flange
Inconel UNS N06625 Pad Flanges	Inconel 625 RTJ Flanges
Inconel Alloy 625 Reducing Flanges	Inconel RTJ Flange 2.4856
Inconel 625 Raised Face Flanges	Inconel 625 RTJ Flanges
Inconel Alloy 625 Ring Flanges	Inconel 625 RTJ Flanges
Inconel 625 Threaded Reducing Flanges	WERKSTOFF NR. 2.4856 Reducing Flanges
Inconel 625 Wnrf Flanges	Inconel 625 Reducing Flanges
DIN 2.4856 Split Flanges	Inconel 625 Reducing Flange 2.4856
Inconel 625 Turbo Flanges	Inconel 625 Forged Flanges
Inconel UNS N06625 Vacuum Flanges	Inconel 625 Reducing Flange
Inconel 625 Reducing Flanges	Inconel 625 Alloy Forged Flange

Manufacturing Inconel 625 Flanges in India, Kamlesh Metal (India) holds a wide range of Inconel UNS n06625 Flanges in stock for immediate despatch throughout India & globally.

Special offer on:

Inconel 625 Forged and Plate Flanges

Inconel 625 Flanges
ASTM B564 Inconel 625 Slip-On Flanges	ASTM B564 Inconel 625 Threaded Flanges
ASTM B564 Inconel 625 Weld Neck Flanges	ASTM B564 Inconel 625 Socket Weld Flanges
ASTM B564 Inconel 625 Blind Flanges	ASTM B564 Inconel 625 Reducing Flanges
ASTM B564 Inconel 625 Lap Joint Flanges	ASTM B564 Inconel 625 Plate Flanges
ASTM B564 Incoloy 625 Orifice Flanges	ASTM B564 Incoloy 625 Forged Flanges
ASTM B564 Incoloy 625 Ring Type Joint Flanges	ASTM B564 Incoloy 625 Square Flanges

Inconel 625 Pipe Flanges Pressure Ratings

ASTM B564 UNS n06625 Flanges Standards / Types and Pressure Class :

ASME/ANSI B 16.36	Welding Neck Flanges, Slip on Flanges, Threaded Flanges
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5	Welding Neck Flanges, Slip on Flanges, Blind Flanges, High Hub Blind Flanges, Socket Weld Flanges, Lap Joint Flanges, Threaded Flanges, Ring Type Joint Flanges
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS	75, 150, 300, 400, 600, 900
BS 4504 SEC 3.1	Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

Inconel 625 Flanges Chemical Composition

Inconel 625 Flanges mechanical properties

Equivalent Grades for ASME SB 564 n06625

Preferred supplier and distributor of flanges in below countries:

Kamlesh Metal (India) is an ISO certified Inconel 625 Flanges exporter in India. All of our ASTM B564 UNS n06625 Flanges are manufactured and tested as per the international standardssuch as ASTM, DIN, JIS, EN, GOST etc. Kamlesh Metal (India) is a highly acclaimed aaaaaaaaaaaaa distributor & dealer in your country. We also supply asme sb 564 n06625 in Asia, Middle east, GCC, Gulf, UK to supply with over 28 countries, we provide after sales service and fast delivery.

Norway, South Africa, Azerbaijan, Chile, Finland, Japan, Indonesia, Netherlands, Malaysia, Estonia, Namibia, Algeria, Kuwait, Slovakia, Kenya, Bangladesh, France, Iran, Zimbabwe, Sri Lanka, Lebanon, India, Russia, China, Serbia, Canada, Mongolia, Iraq, Hong Kong, Iran, Lithuania, Puerto Rico, Gabon, Nigeria, Vietnam, Bolivia, Mexico, Ukraine, Trinidad & Tobago, Tunisia, Denmark, New Zealand, Gambia, Israel, Turkey, Greece, United States, Libya, Macau, Tibet, United Kingdom, Brazil, Bulgaria, Colombia, South Korea, Belgium, Oman, Egypt, Croatia, Austria, Costa Rica, Czech Republic, Philippines, Italy, Singapore, Spain, Saudi Arabia, Jordan, Mexico, Venezuela, Hungary, Germany, Bahrain, Ghana, Nepal, Belarus, Bhutan, Yemen, Ecuador, Nigeria, Taiwan, Chile, United Arab Emirates, Qatar, Peru, Switzerland, Angola, Ireland, Morocco, Australia, Thailand, Portugal, Afghanistan, Pakistan, Argentina, Romania, Poland, Poland, Kazakhstan, Sweden

Ready stock of flanges in below cities:

Jaipur, Bengaluru, Cairo, Jakarta, Noida, Baroda, Santiago, Perth, Visakhapatnam, Atyrau, Ankara, Aberdeen, Milan, Thiruvananthapuram, Pune, Haryana, Hong Kong, Montreal, London, Al Jubail, Ho Chi Minh City, Surat, Los Angeles, Edmonton, Navi Mumbai, Sharjah, Thane, New York, Petaling Jaya, Kuala Lumpur, Dubai, Gurgaon, Hanoi, Ahmedabad, Istanbul, Sydney, Rajkot, Bogota, Toronto, Al Khobar, Karachi, Dammam, Granada, Singapore, Jamshedpur, Dallas, Moscow, Courbevoie, Caracas, Manama, Busan, Seoul, Ernakulam, Ranchi, Lagos, Ludhiana, Chandigarh, Brisbane, Abu Dhabi, Faridabad, Kanpur, New Delhi, Kuwait City, Howrah, Ulsan, Algiers, Chennai, Hyderabad, Ahvaz, Rio de Janeiro, Melbourne, Mexico City, Bangkok, Bhopal, Kolkata, Tehran, Madrid, Houston, Lahore, Gimhae-si, Coimbatore, Secunderabad, Geoje-si, Nagpur, Riyadh, Vadodara, Mumbai, La Victoria, Pimpri-Chinchwad, Jeddah, Muscat, Calgary, Nashik, Colombo, Indore, Doha, Port of Spain, Vung Tau, Chiyoda

Ready stock of Inconel 625 Flanges, ASTM B564 UNS n06625 Flanges suppliers in Mumbai, India

Manufacting high pressure asme sb 564 n06625 in India, Get the Lowest Price on Inconel 625 Flanges, contact ASTM B564 UNS n06625 Flanges manufacturers in Mumbai, Rajkot, Vadodara, Chennai & Pune - India